

Moisture Testing
Mould will only grow when there is sufficient moisture available. Generally, Relative Humidity must remain above 50-55% for a prolonged period for mould to thrive. If there is mould growing in your property, then there is a moisture problem.
During Mould Inspection assessments, we look at the extent of the mould problem AND the underlying cause - moisture. Using dedicated testing equipment we determine whether the moisture is the result of excessive condensation, leaks or rising damp.
Our recommendations for mould remediation always include methods to reduce or eliminate the moisture problem.
Condensation is most obvious on mirrors,
single glazed windows and wall tiles, but it may also occur on walls and
ceilings, particularly in kitchens and bathrooms because we carry out most of
the vapour producing activity in those rooms. If you insulate and warm the
house thoroughly, you might think that condensation can be avoided, but unless
you keep the moisture content of the air (the Relative Humidity – RH) below
about 65-70% RH, condensation may still form. To control the Relative Humidity
you need to balance heating with ventilation, or use a Dehumidifier.
Condensation is an extremely underestimated
cause of damage to our homes. It can significantly contribute to ruined
paintwork, wood, wallpaper and flaking plasterwork and the total bill for
repair can by far exceed the expenses of a timely intervention. All redecoration
using paints should incorporate Anti-Mould Additive: avoid wallpapers if
possible, (mould loves to grow in the lining) but if you decided on using
wallpaper – use an anti-mould wallpaper paste.
Mould Inspection & Removal Services Black Mould Cleaning Professional Mould Remidiation Toxic Mould Removal Asthma Odour Disinfection Damp Problems Mould Testing Analysis Moisture Testing